Inquiry On WhatsApp
+86 19031313708
Contact Via E-mail
gtofrp@gtofrp.comViews: 0 Author: Site Editor Publish Time: 2025-05-08 Origin: Site
Fiberglass Reinforced Plastic (FRP) panels are widely used in commercial kitchens, restrooms, basements, and healthcare facilities due to their resistance to moisture, mold, and impact. However, installing FRP panels correctly requires choosing the right method based on the wall type—whether it’s drywall, concrete, wood studs, or tile.
In this article, we’ll walk you through the best installation methods for various wall surfaces and share tips for a smooth, durable result.
Why use it?
Drywall is common in residential and commercial interiors. FRP is often used to add protection in high-moisture or high-traffic areas.
Installation steps:
Clean and dry the drywall surface. Remove dust and flaking paint.
Apply FRP adhesive using a notched trowel directly on the panel or wall.
Press the panel onto the wall starting from the bottom up.
Use a laminate roller to smooth out air pockets.
Tips:
Do not install over damaged or uneven drywall.
Use PVC or aluminum trim pieces for a clean, finished look.
Why use it?
Concrete walls are common in basements and industrial settings.
Installation steps:
Repair any cracks or holes. Ensure the surface is clean and dry.
Use a solvent-based or epoxy FRP adhesive for better bonding.
Apply adhesive generously and firmly press panels against the wall.
Use temporary bracing or mechanical fasteners if needed.
Tips:
If the wall is too uneven, install furring strips and apply plywood sheathing before mounting FRP.
Why use it?
New constructions or renovations often expose wood or metal studs.
Installation steps:
Cover studs with 1/2" or 5/8" plywood or drywall for a flat mounting surface.
Install FRP panels as you would over drywall.
Use corner guards and divider bars to join panels securely.
Tips:
Never attach FRP panels directly to studs without a backer board.
Why use it?
Upgrading old tile walls with FRP is a fast way to modernize bathrooms and kitchens.
Installation steps:
Clean tile thoroughly and roughen the surface with sandpaper.
Apply a construction-grade adhesive or epoxy glue.
Press and roll the FRP panel firmly against the tile.
Seal edges with waterproof silicone caulk.
Tips:
Make sure grout lines are flush with the tile for a smoother finish.
Always check the manufacturer’s installation guide for adhesive compatibility.
Use protective gear, especially when working with adhesives.
Allow 24–48 hours for curing before subjecting FRP panels to moisture or impact.
Whether you’re installing FRP panels on drywall, masonry, studs, or tile, the key to success lies in surface preparation and using the right materials. By following these wall-specific techniques, you’ll achieve a durable, professional finish that stands up to time and wear.
