Inquiry On WhatsApp
+86 19031313708
Contact Via E-mail
gtofrp@gtofrp.comViews: 0 Author: Site Editor Publish Time: 2025-05-08 Origin: Site
Fiberglass Reinforced Plastic (FRP) wall panels are a popular solution in commercial kitchens, bathrooms, hospitals, and other spaces requiring a moisture-resistant and easy-to-clean wall surface. But before you start your FRP panel project, it's important to understand the true cost of installation, from materials to labor.
This article breaks down everything you need to know about FRP panel installation cost, including price per square foot, labor charges, and tips for keeping your project within budget.
| Installation Type | Average Cost per Square Foot |
Material Only (FRP panels + adhesive + trim) | $1.50 – $3.00 |
Labor Only | $2.00 – $4.50 |
Total Installed Cost | $3.50 – $7.50 |
Prices vary based on region, wall condition, and installation complexity.
FRP Wall Panels: $0.90 – $2.00 per sq.ft. depending on thickness, texture, and color.
Adhesive or Epoxy: $20–$40 per gallon (covers ~150–200 sq.ft.).
Trim Molding (Inside/Outside/Divider): ~$1.50 – $3.00 per linear foot.
Fasteners (if used): ~$0.05 – $0.10 each.
Tools (if DIY): Roller, notched trowel, saw – budget ~$30–$100.
Labor rates vary depending on local market rates, installer experience, and wall type:
| Wall Type | Labor Cost per Sq.Ft. |
Drywall (smooth surface) | $2.00 – $3.00 |
Concrete or masonry | $2.50 – $4.00 |
Studs (requires backer board) | $3.50 – $5.00 |
Over tile (requires prep) | $3.00 – $4.50 |
Installing over studs or tile adds complexity and cost due to required prep work.
Wall Preparation: Old paint, damage, or uneven surfaces require patching or furring strips.
Ceiling Height: Higher walls may require scaffolding or lift equipment.
Adhesive Type: Epoxy is costlier but needed for high-moisture areas.
Layout Complexity: Cutting around fixtures or uneven corners increases labor time.
Geographic Location: Urban areas may have higher labor costs.
DIY installation can save on labor, but it requires precision and the right tools. A poor install can result in warping or panel failure.
Professional FRP panel installers:
Ensure proper adhesive use
Cut and align panels accurately
Reduce material waste
Offer warranties or service guarantees
Get multiple quotes from local FRP panel installers near you.
Buy materials in bulk to reduce per-panel costs.
Choose standard-sized panels (4’x8’ or 4’x10’) to minimize cuts and waste.
Schedule installation during off-peak months when labor rates may be lower.
The average cost to install FRP wall panels typically ranges from $3.50 to $7.50 per square foot. To stay within budget, compare local labor rates, evaluate your wall conditions, and consider your ability to handle a DIY install. With the right planning, FRP panel installation can be a cost-effective way to upgrade walls in commercial or residential spaces.
